Prep in an Amazing Way with Valid Juniper JN0-683 Dumps

With the most scientific content and professional materials JN0-683 preparation materials are indispensable helps for your success. Such a valuable acquisition priced reasonably of our JN0-683 study guide is offered before your eyes, you can feel assured to take good advantage of. And we give some discounts from time to time on our JN0-683 Exam Questions for promoting. If you come to visit our website more times, you will buy our JN0-683 practice engine at a more favorable price.

To do this you just need to enroll in Juniper JN0-683 exam and strive hard to pass the Data Center, Professional (JNCIP-DC) (JN0-683) exam with good scores. However, you should keep in mind that the Juniper JN0-683 certification exam is different from the traditional exam and always gives taught time to their candidates. But with proper Data Center, Professional (JNCIP-DC) (JN0-683) exam preparation, planning, and firm commitment can enable you to pass the challenging Data Center, Professional (JNCIP-DC) (JN0-683) exam.

>> JN0-683 Hot Questions <<

Valid Braindumps Juniper JN0-683 Free, Test JN0-683 Pattern

Our JN0-683 study guide is a very important learning plan to make sure that you will pass the exam successfully and achieve the certification. Our staff will create a unique study plan for you based on the choice of the right version of the JN0-683 Exam Questions. In order to allow you to study and digest the content of our JN0-683 practice prep more efficiently, we will advise you to choose the most suitable version based on your time and knowledge.

Juniper Data Center, Professional (JNCIP-DC) Sample Questions (Q58-Q63):

NEW QUESTION # 58
You are designing an IP fabricfora large data center, and you are concerned about growth and scalability.
Which two actions would you take to address these concerns? (Choose two.)

A. Use EX4300 Series devices as the spine devices.
B. Use OFX5700 Series devices as the super spines.
C. Design a five-stage Clos IP fabric.
D. Design a three-stage Clos IP fabric.

Answer: B,C

NEW QUESTION # 59
You are asked to deploy 100 QFX Series devices using ZTP Each OFX5120 requires a different configuration. In this scenario, what are two components that you would configure on the DHCP server?
(Choose two.)

A. the MAC address for each OFX5120
B. the management IP address for each OFX5120
C. the MAC address of the FTP server
D. the IP address of the FTP server

Answer: A,B

Explanation:
* Zero Touch Provisioning (ZTP):
* ZTP allows for the automated configuration of network devices, like QFX Series switches, without manual intervention. During ZTP, a switch will obtain its configuration from a DHCP server and then download the required software and configuration files from a specified server (e.
g., FTP, HTTP).
* DHCP Server Configuration:
* Option B:The DHCP server needs to know theMAC address for each QFX5120to provide a specific configuration based on the device identity. By mapping the MAC address to a particular configuration, the DHCP server can ensure that each switch gets the correct configuration.
* Option D:Themanagement IP address for each QFX5120must also be assigned by the DHCP server. This IP address allows the device to communicate on the network and access the configuration files and other required resources during the ZTP process.
Conclusion:
* Option B:Correct-MAC addresses allow the DHCP server to identify each QFX5120 and assign the appropriate configuration.
* Option D:Correct-Management IP addresses are essential for network communication during ZTP.

NEW QUESTION # 60
Exhibit.

You are troubleshooting an IP fabric (or your data center. You notice that your traffic is not being load balanced to your spine devices from your leaf devices. Referring to the configuration shown in the exhibit, what must be configured to solve this issue?

A. The multipast multiple -as configuration must be configured for each peer in the BGP spine group.
B. The load-balance policy must have a from statement that matches on protocol bgp.
C. The load-balance policy must be applied to the forwarding table under the routing-options hierarchy.
D. The load-balance policy must be applied as an export policy to your BGP

Answer: C

Explanation:
Step 1: Understand the Configuration in the Exhibit
The exhibit provides three configuration snippets from a leaf device (user@leaf#):
* Policy Options:
user@leaf# show policy-options
policy-statement load-balance {
term 1 {
then {
load-balance per-packet;
}
}
}
* A policy named load-balance is defined, which applies the load-balance per-packet action. In Juniper terminology, per-packet actually means per-flow load balancing (a common point of confusion). This policy is intended to enable load balancing across multiple paths.
* Routing Options:
user@leaf# show routing-options
router-id 192.168.100.11;
autonomous-system 65100;
* The router ID is set to 192.168.100.11, and the autonomous system (AS) number is 65100. There' s no mention of applying the load-balance policy here, which is a clue to the issue.
* BGP Configuration:
user@leaf# show protocols
bgp {
group spine {
type external;
export direct;
local-as 65003;
multipath {
multiple-as;
}
neighbor 172.16.1.5 {
peer-as 65001;
}
neighbor 172.16.1.17 {
peer-as 65002;
}
}
}
* BGP is configured with an external group spine, where the leaf device (local AS 65003) peers with spine devices (AS 65001 and 65002).
* The multipath multiple-as statement is enabled, which allows BGP to install multiple paths for the same prefix in the routing table, even if the paths come from different AS numbers. This is a prerequisite for load balancing in a multi-AS environment like an IP fabric.
* The export direct policy is applied, which likely exports directly connected routes to the spine devices.
Step 2: Identify the Problem
The issue is that traffic from the leaf to the spine devices is not being load-balanced, despite the presence of a load-balance policy and BGP multipath. For load balancing to work in this scenario:
* BGP multipath ensures multiple paths are installed in the routing table.
* The load-balance per-packet policy is meant to distribute traffic across those paths.
* However, the load-balance policy is defined but not applied anywhere in the configuration shown. For load balancing to take effect, the policy must be applied in the correct context.
Step 3: Evaluate the Options
Let's go through each option to determine the correct solution:
* A. The load-balance policy must be applied to the forwarding table under the routing-options hierarchy.
* In Junos, to enable load balancing across multiple paths for forwarding, the load-balance policy must be applied at the forwarding table level. This is done under the routing-options hierarchy using the forwarding-table export statement. For example:
set routing-options forwarding-table export load-balance
* This ensures that the load-balancing policy is applied to the forwarding table, allowing traffic to be distributed across multiple equal-cost paths installed by BGP.
* B. The multipath multiple-as configuration must be configured for each peer in the BGP spine group.
* The multipath multiple-as statement is already configured under the spine group, and it applies to all neighbors in that group (172.16.1.5 and 172.16.1.17). There's no need to configure it per peer, as the group-level configuration is sufficient. This option is incorrect because the required setting is already in place.
* C. The load-balance policy must be applied as an export policy to your BGP.
* Applying the load-balance policy as a BGP export policy (e.g., export load-balance under the BGP group) would affect the routes advertised to the spine devices. However, the load-balance per-packet action is a forwarding action, not a route advertisement action. Applying it as a BGP export policy would not achieve the desired load balancing for traffic forwarding and is incorrect.
* D. The load-balance policy must have a from statement that matches on protocol bgp.
* The load-balance policy currently applies the load-balance per-packet action unconditionally (no from statement). Adding a from protocol bgp condition would make the policy apply only to BGP routes, but this is unnecessary in this context. The policy needs to be applied to the forwarding table to affect traffic, not modified with a from statement. This option doesn't address the core issue of applying the policy.
Step 4: Determine the Correct Answer
The key issue is that the load-balance policy is defined but not applied. For load balancing to work, it must be applied to the forwarding table under routing-options. This matchesOption A:
* A. The load-balance policy must be applied to the forwarding table under the routing-options hierarchy.
Step 5: Provide Official Juniper Documentation Reference
Since I don't have direct access to Juniper's proprietary documents, I can provide an explanation based on standard Junos documentation practices and publicly available resources, such as the Juniper TechLibrary, which is the official source for Junos configuration guides.
In Juniper's official documentation, specifically in theJunos OS Routing Protocols and Policies Configuration Guide, the process for enabling load balancing is described as follows:
* Load Balancing in Junos: To enable per-flow load balancing across multiple paths, you must define a policy with the load-balance per-packet action and apply it to the forwarding table. The relevant configuration hierarchy is:
routing-options {
forwarding-table {
export <policy-name>;
}
}
* Explanation from Documentation: The load-balance per-packet action (which performs per-flow balancing) requires the policy to be applied at the forwarding-table level to influence how traffic is distributed across multiple paths in the forwarding table. Without this, even if BGP installs multiple paths (via multipath), the forwarding engine will not load-balance traffic.
This aligns with the JNCIP-DC exam objectives, which include understanding how to configure and troubleshoot load balancing in an IP fabric, such as applying policies for traffic distribution.

NEW QUESTION # 61
You are deploying a new network lo support your Al workloads on devices that support at least 400 Gbps Ethernet. There is no requirement for any Layer 2 VLANs in this network. Which network architecture would satisfy this requirement?

A. an IP fabric using PIM-SM to signal VXLAN overlay
B. an IP fabric using EBGP
C. an IP fabric with an EVPN-VXLAN architecture
D. an IP fabric using the EVPN-MPLS architecture

Answer: B

Explanation:
* Requirements for AI Workloads:
* The scenario requires a network that supports at least 400 Gbps Ethernet and does not require Layer 2 VLANs. This setup is well-suited for a pure Layer 3 network, which can efficiently route traffic between devices without the overhead or complexity of maintaining Layer 2 domains.
* Choosing the Right Network Architecture:
* Option D:An IP fabric using EBGP (External BGP) is ideal for this scenario. In a typical IP fabric, EBGP is used to handle routing between spine and leaf switches, creating a scalable and efficient network. Since there is no need for Layer 2 VLANs, the pure IP fabric design with EBGP provides a straightforward and effective solution.
* Options A, B, and Cinvolve more complex architectures (like VXLAN or EVPN), which are unnecessary when there's no requirement for Layer 2 overlays or VLANs.
Conclusion:
* Option D:Correct-An IP fabric with EBGP is the most suitable and straightforward architecture for a network that needs to support high-speed AI workloads without Layer 2 VLANs.

NEW QUESTION # 62
Exhibit.

Referring to the exhibit, when Host A sends an ARP request for Host B's IP address, which Junos feature does leaf1 require to send an ARP response back to Host A without having to send a broadcast frame over the fabric?

A. GARP
B. DAD
C. proxy ARP
D. proxy NDP

Answer: C

Explanation:
* Scenario Overview:
* In the exhibit, Host A is trying to resolve Host B's IP address (10.10.1.2) through ARP (Address Resolution Protocol). Normally, an ARP request would be broadcasted over the network, and the host owning the IP address (Host B) would respond.
* Role of Proxy ARP:
* Option A:Proxy ARPallows a router or switch (in this case, leaf1) to respond to ARP requests on behalf of another host. Leaf1, knowing the MAC address of Host B through the EVPN MAC advertisement, can reply to Host A's ARP request directly without broadcasting the request across the entire network fabric. This feature reduces unnecessary traffic and increases network efficiency.
Conclusion:
* Option A:Correct-Proxy ARP enables leaf1 to respond to Host A's ARP request for Host B's IP without broadcasting over the IP fabric, thus providing the ARP response locally.

NEW QUESTION # 63
......

Our JN0-683 actual exam are scientific and efficient learning system for a variety of professional knowledge that is recognized by many industry experts. We have carried out the reforms according to the development of the digital devices not only on the content of our JN0-683 Exam Dumps, but also on the layouts since we provide the latest and precise JN0-683 information to our customers, so there is no doubt we will apply the most modern technologies to benefit our customers.

Valid Braindumps JN0-683 Free: https://www.testkingpass.com/JN0-683-testking-dumps.html

The third party, the surrogate of TestkingPass Valid Braindumps JN0-683 Free and TestkingPass Valid Braindumps JN0-683 Free offer services together, Our JN0-683 exam cram will help you twice the result with half the effort, We offer you free demo for you to have a try before buying for JN0-683 learning materials, so that you can have a deeper understanding of what you are doing to buy, If you want to clear a JN0-683 exam on the first attempt, then you should consider checking out these JNCIP-DC PDF questions so you can make things a lot easier and better for yourself.

Don’t confuse your mind with irrelevant JN0-683 practice exam pdf, After you purchase our JN0-683 reliable vce pdf, we will send you the JN0-683 latest training torrent, our customer service serve for you 24 hours online.

2025 JN0-683 Hot Questions Pass Certify | Professional Valid Braindumps JN0-683 Free: Data Center, Professional (JNCIP-DC)

The third party, the surrogate of TestkingPass and TestkingPass offer services together, Our JN0-683 Exam Cram will help you twice the result with half the effort.

We offer you free demo for you to have a try before buying for JN0-683 learning materials, so that you can have a deeper understanding of what you are doing to buy.

If you want to clear a JN0-683 exam on the first attempt, then you should consider checking out these JNCIP-DC PDF questions so you can make things a lot easier and better for yourself.

Is it safe to buy this Juniper JN0-683 braindump from your website?

Karl Ross Karl Ross

Biography

Prep in an Amazing Way with Valid Juniper JN0-683 Dumps

Valid Braindumps Juniper JN0-683 Free, Test JN0-683 Pattern

Juniper Data Center, Professional (JNCIP-DC) Sample Questions (Q58-Q63):

2025 JN0-683 Hot Questions Pass Certify | Professional Valid Braindumps JN0-683 Free: Data Center, Professional (JNCIP-DC)

AKS Global Safety

Useful Links

Our Courses

Contact